Roland MICRO CUBE Guitar Amplifier Stereo Amplifier User Manual


 
9
Panel Descriptions
Connecting the AC adaptor
Use only the AC adaptor included with the MICRO
CUBE. Use of other AC adaptors may damage the amp
or result in other problems.
To prevent the inadvertent disruption of power
to your unit (should the plug be pulled out
accidentally), and to avoid applying undue stress
to the AC adaptor jack, anchor the power cord
using the cord hook, as shown in the illustration.
A Note About Attaching the Strap
Attach the strap securely so that it does not easily
become detached. If the strap is loose, and you
use it that way when carrying the MICRO CUBE,
the amp could be dropped, possibly resulting in
damage or injury.
Use only the provided strap.
The included strap is meant for exclusive use with the
MICRO CUBE. Do not use this strap for other products.
Do not spin or swing the MICRO CUBE while holding
it by the strap. This is extremely dangerous, as it may
cause the strap to become detached; or, if the motion is
repeated enough, may even break the strap.
A Note About Batteries
In addition to the AC adaptor, the MICRO CUBE
can also be powered with six AA batteries
(optional). Insert the batteries as shown in the
figure, making sure that the batteries are oriented
correctly.
Use only alkaline batteries.
If there are batteries in the unit while an AC
adaptor is being used, normal operation will
continue should the line voltage be interrupted
(power blackout or power cord disconnection).
* When installing or replacing batteries, always turn off
the power on this unit and disconnect any other devices
you may have connected. This way, you can prevent
malfunction and/or damage to speakers or other devices.
* Expected battery life under continuous use:
Alkaline: approx. 20 hours
This figure will vary depending on the actual conditions
of use.
MICRO_CUBE_e.book 9 ページ 2003年10月29日 水曜日 午後5時15分