Roland KCW-1 Speaker User Manual


 
Owner’s Manual
Thank you, and congratulations on your choice of the Roland Powered Subwoofer KCW-1.
201b
These sections provide important information concerning the proper operation of the unit.
Additionally, in order to feel assured that you have gained a good grasp of every feature
provided by your new unit, Owner’s manual should be read in its entirety. The manual
should be saved and kept on hand as a convenient reference.
Main Features
Equipped with a specialized 10-inch (25 cm) subwoofer speaker, the high-powered KCW-
1 has an output of 200 watts.
The KCW-1’s CROSSOVER knob allows you to balance sounds according to the low-
frequency playback capability of the connected device.
Also featured is a BOTTOM switch that further boosts low-frequency sounds.
INPUT and THRU OUT both feature 1/4” phone jacks and XLR connectors for greater
connectivity to a variety of devices.
With the THRU OUT connector, you can even connect devices with no SUBWOOFER
OUT to the KCW-1.
You can connect an optional foot switch and use your foot to switch the output from the
KCW-1’s speaker on and off.
The unit also has a built-in handle for easy portability.
202
Copyright © 2003 ROLAND CORPORATION
All rights reserved. No part of this publication may be reproduced in any form without the
written permission of ROLAND CORPORATION.
Before using this unit, carefully read the sections entitled:
IMPORTANT SAFETY INSTRUCTIONS (p. 2)
USING THE UNIT SAFELY (p. 3–p. 4)
IMPORTANT NOTES (p. 5)
KCW-1_e.book 1ページ 2006年9月8日 金曜日 午前11時50分