Filter
Top Products
Roksan Audio ltd Caspian Integrated CD Player User Manual
CLASSIFICATION: General Use Version 1.07
All specifications are liable to change without notice. E&OE Page 9 ENGLISH
REPEAT
There are three repeat functions available on your CD player:
1. To repeat all tracks on the disc press Repeat Button (10) 1/ALL. The display will show ‘REPEAT (ALL)’.
2. To repeat one track press Repeat Button (10) 1/ALL twice. The display will show ‘REPEAT (ONE)’.
3. To repeat a section:
• Press PLAY to start playing the disc
• Go to the track at the start of the section
• Designate the beginning of the section by pressing Repeat Button (11) A-B. The display will
show ‘REPEAT (A)’
• Go to the track at the end of the section
• Designate the beginning of the section by pressing Repeat Button (11) A-B. The display will
show ‘REPEAT (B)’
The section selected will play repeatedly until pressing Repeat Button (11) A-B again to stop section
repeat.
MEMORY
Pressing the Memory Button (12) lets you select specific tracks and play them in any order. Programming must
be performed in STOP mode.
To programme a sequence:
1 Press Memory Button (12) on the handset.
2 Select a track from the handset, using the Track Forward, Track Back Buttons (7, 8), or via the Numeric
Keys (14). (For example track 3)
3 Select the next desired track. (For example track 9)
4 When you have assembled your programme, press the Play Button to start Programme Play.
• You can select a track more than once to be played in the programme.
• You can press stop and the programme will still remain.
• You can check and change programmed tracks in stop mode by pressing the Check Button (13) to
march through the programme steps and use the Clear Button (16) to delete a track and then select a
new track in its place if you wish.
TO CANCEL A PROGRAMME
Press the Clear Button (16) in stop mode and hold for 3 seconds to clear all programmed tracks.
Display
Shows 3 the selected track
and step 2 ready for next
track to be programmed.
Display
Shows 9 the selected track
and step 3 ready for next
track to be programmed.
TRACK
STEP
MEMOR
Y
Display
The word MEMORY lights
and the display flashes
track 1 and step 1 ready for
programming.
TRACK
STEP
3
MEMOR
Y
TRACK
STEP
3
9
MEMOR
Y