Rockford Fosgate P550.2 Stereo Amplifier User Manual


 
OPERATION
8
INSTALLA
TION
Bridged/Mono Wiring
2-Channel Wiring
REMOTE PUNCH BASS (All models except P200.2)
Mounting and installation
1. Find a location that gives easy access to the remote.
NOTE:You can mount this unit in a variety of ways.Remove the back housing by using a small flat
screwdriver in the slotted hole at the back.The housing can be installed with the mounting tab up
or down, or left off for in panel installation.
2. Route the cable for the remote and connect to the amplifier.