2-Channel Mono Operation
– 22 –
Front
Gain
Rear
Gain
0/180 4/2
INPUT
REM B+ GND
LED
Rear Front
Pass-Thru
Front Rear
4 ohm min. 4 ohm min.
+ –
+ –
– L++L–
+R––R+
• RCAs are connected to front inputs
• Signal Input Switch set to 2-channel input
• Phase Switch set to 0°
• Gain for front left and right channels set equally to balance
the subwoofer
• Gain for rear left and right channels set equally to balance
the subwoofer
• Impedance for front bridged channel should be no less than 4Ω
• Impedance for rear bridged channel should be no less than 4Ω
• Front XCard can be set to 12dB High-Pass, 12dB Low-Pass or
Full Range
• Rear XCard can be set to 12dB High-Pass, 12dB Low-Pass or
Full Range