Rockford Fosgate 200S Stereo Amplifier User Manual


 
4
DESIGN FEATURES
1. LED Power Indicator The LED illuminates when the unit is turned on.
2. REM Terminal This spade terminal is used to remotely turn-on and turn-off the amplifier when
+12V DC is applied.
3. Power Terminals The power and ground connectors on the amplifier are gold-plated and will
accommodate up to 8 AWG (10 AWG Model 200S) wire maximizing the input current
capability of the amplifier.
4. Cast Aluminum Heatsink The cast aluminum heatsink of the Punch amplifier dissipates heat
generated by the amplifier's circuitry. The inherent advantage of casting provides a 30%
improvement of cooling over conventional extrusion heatsink designs.
5. Punch Bass (Models 150S & 200S) Helps correct for acoustical deficiencies in the listening
environment by helping produce full range sound without adding excessive boost.. The Punch
Bass control is a narrow band adjustment at 45Hz switchable from 0dB to +6dB to +12dB.
5. Punch Bass (All Other Models) Helps correct for acoustical deficiencies in the listening
environment by helping produce full range sound without adding excessive boost.. The Punch
Bass control is a narrow band adjustment at 45Hz variable from 0dB to + 18dB. Connection is
made with a cable using RJ-45 and can be installed under the dash for remote control access.
758 9
1010
4123
6
4123
Connections -
Models 150S &
200S
Power
Connections -
Models 300S,
400S & 500S
412 3
665 7789
1010
Connections -
Models 300S,
400S, 500S &
700S
Power
Connections -
Model 700S