Filter
Top Products
– 1 –
I NTRODUCTION
Rockford engineers designed the Punch 2-channel amplifiers to
withstand the rugged automotive environment while delivering
superior sound quality in a flexible, reliable, and efficient pack-
age. A grounding technique called TOPAZ was used to eliminate
noise problems associated with car audio systems, while flexibil-
ity was accomplished with the use of a built-in XCard. Reliability
was accomplished with the use of protection circuits called RTP
and NOMAD, while MOSFET and DSM technology improve
amplifier efficiency. The result of these components give the
Punch amplifier awesome sound quality in a “Bullet Proof”
package. An explanation of these technologies, some exclusively
designed by Rockford, are described in the Technical Design
Features.
PUNCH 2-CHANNEL AMPLIFIER
A CCESSORY PACK
The accessory pack shipped with the Punch 2-channel amplifiers
includes the mounting hardware necessary to secure them to the
vehicle as well as attaching the end caps.
Installation & Operation Manual
Punch Verification Certificate
(1) 17' (518.16cm) Red Power Wire
(1) 12' (365.76cm) Remote Turn-On Wire
(1) 1.5' (45.72cm) Black Grounding Wire
(1) Female Connector for Remote Turn-On Wire
(1) Ring Terminal for Ground Wire
(1) Ring Terminal for Battery Post
(1) ATC Inline Fuseholder (Punch 40ix, 60ix, 100ix)
(1) AGU Inline Fuseholder (Punch 200ix)
(6) Hex Head Screws for speaker and power connectors
(4) Mounting Screws for end caps
(4) Mounting Screws for amplifier
(1) Allen Wrench 7/64"
(1) Allen Wrench 3/32"