Filter
Top Products
– 14 –
3386
f
o
= R (in kΩ) for .047µf cap
= R (in kΩ) for .022µf cap
7234
f
o
Where: R = Ω
f
o
= desired crossover frequency
c = capacitor in farads
ex: .047 x 10
-6
for .047µf cap
Crossover Card
High Pass
Low Pass
Full Range
R1
R2
R1
R2
FULL
The crossover point can be altered by changing all 4 resistor values. Use the following
formula to select the appropriate resistor value to be placed on the XCard.
U
SING
THE
XC
ARD
1
2πf
o
c
The actual formula is:
R =
Low-Pass Full RangeHigh-Pass
FULL
↕
HP
➝
➝
LP
HP
➝
➝
LP
The crossover functions are controlled through the use of an XCard and can
be set for high-pass, low-pass or full range operation. The XCard shipped with
your amplifier is set for Full Range. Each crossover card has two faces: one
face operates Full Range, the other has arrows to indicate the edge for
selecting HP (high-pass) or LP (low-pass) operation. Orient the card with the
desired operating edge, indicated by the arrow, toward the socket terminals
inside the amplifier. Firmly, but carefully, plug the card into the socket.
a
d
v
a
n
c
e
d
O
p
e
r
a
t
i
o
n