Roberts Radio RD-59 Radio User Manual


 
If you need any further advice, please call our Technical Helpline on :-
020 8758 0338 (Mon-Fri)
System reset
If your radio fails to operate correctly, or some digits on the display are
missing or incomplete carry out the following procedure.
1. Press and hold down the Info button for 2 seconds
2. Repeatedly press the Tuning Up/Down buttons until the display
shows "Factory reset", then press the Select button.
3. If you wish to perform the reset operation, press the Select button
one more time. A full reset of your radio will be performed. All presets
and station lists will be erased.
4. After a system reset a scan of the DAB band will be performed.
In case of malfunction due to electrostatic discharge, reset the product
(reconnection of power source may be required) to resume normal
operation.
If a problem persists our technical staff would be pleased to offer
any assistance on operating the radio. Our technical helpline
number is 020 8758 0338.
Software version
The software display cannot be altered and is just for your reference.
1. To view the software version on the display press and hold the Info
button for 2 seconds.
2. Repeatedly press the Tuning Up/Down buttons until “SW Version”
together with the version number appears on the display.
3. After a few seconds the display will revert to the normal display
mode.
1
2
2,3
1
2
18