Roberts Radio RD-21 Radio User Manual


 
19
System reset
If your radio fails to operate correctly, or some digits on the display are
missing or incomplete, if running on batteries first check that the batteries
are not exhausted. If you still suspect a problem with your radio please
carry out the following procedure.
1. In FM mode, press and hold down the Info/Menu button for 2 seconds.
The display will show "SELECT Factory reset".
2. In DAB mode, press and hold down the Info/Menu button and rotate
the Tuning control or press the Up or Down buttons until the display
shows "Select Factory reset".
3. Press and release the Select button until the display shows "Press
SELECT to confirm reset".
4. Press
Select button again to confirm system reset.
5. A full reset will be performed all presets and station lists will be
erased.
6. After a system reset a scan of the DAB band will be performed.
In case of malfunction due to electrostatic discharge, reset the product
(reconnection of power source may be required) to resume normal
operation.
If a problem persists our technical staff would be pleased to help
offer any assistance on operating the radio. Our technical helpline
number is 020 8758 0338.
1,2
2
2
2
3,4