Roberts Radio ecologic 4 Radio User Manual


 
9
Finding new stations - DAB
As time passes new stations may become available. To fi nd new stations
proceed as follows:-
1. Press and release the AutoTune button, the display will show "Scan-
ning". Your radio will perform a scan of the UK DAB frequencies. As
new stations are found the station counter on the right-hand side of
the display will increase and stations will be added to the list
2. To carry out a full scan of the entire DAB band (band III) press and
hold down the AutoTune button for more than 2 seconds and then
release. The display will show "Scanning". As new stations are found
the station counter on the right-hand side of the display will increase
and stations will be added to the list
1
2
1
Signal strength display - DAB
1. Press and release the Select button to switch between the current
information display and the signal strength indication.
2. Position your radio and carefully angle the telescopic aerial for best
reception using the signal strength display as a guide. Move your radio
around and position so as to give maximum number of black rectangles
on signal strength display. The clear unfi lled rectangle indicates the
minimum signal level required for satisfactory reception.