Filter
Top Products
If you need any further advice, please call our Technical Helpline on :-
020 8758 0338 (Mon-Fri)
Preventing accidental erasure
1. To safeguard your recordings against accidental erasure, break off
the appropriate tab on the cassette as shown .
2. There is one tab for each side of the cassette. This will prevent the
Record button from being pressed.
3. To restore the cassette to normal, seal the tab openings with a small
piece of self-adhesive tape.
A
Cleaning tape heads
The oxide from magnetic tapes can accumulate on the pinch roller (A)
the capstan shaft (B) and also the heads (C and D). This will impair the
sound quality.
To clean these parts proceed as follows:-
1. Switch off the power to the unit.
2. Press the Stop/Eject button.
3. Press the Play button and the heads will be clearly seen.
4. Clean the surfaces (A, B, C, D) with a lint free rag or cotton swab
soaked in alcohol. Press the stop/eject button as soon as cleaning
is over.
14
cd9949 instruction book.PMD 8/31/2005, 3:17 PM15