Filter
Top Products
If you need any further advice, please
call our Technical Helpline on
0181 758 0338 (Mon-Fri)
CD operation
Playing a disc
Press the open button (13) to open the CD compartment. Carefully place a
disc onto the spindle in the CD compartment, ensuring that the label is facing
upwards. Close the lid ensuring it latches shut. Slide the Tape/Radio/CD
switch (3) to the "CD" position. The Liquid crystal display (18) will light up if
the unit is connected to the mains supply. Press the CD play/pause button
(10) to play the disc. Adjust the volume control (5) and tone control (1) to the
required settings. To switch off, slide the Tape/Radio/CD switch (3) to the "Off/
Tape" position.
Pausing during CD play
Whilst the CD is playing, press the CD play/pause button (10) to pause play.
The disc will continue rotating, but play will stop and the track number will
flash in the Liquid crystal display (18). To resume play, press the CD play/
pause button (10) again. The track number will stop flashing in the Liquid
crystal display.
Stopping CD play
To stop CD play, press the stop button (9). The disc will stop rotating.
Skip function
Whilst the CD is playing, press either the F Skip or B Skip buttons (12) to
change to the desired track.
Search function
Whilst the CD is playing, press and hold down either the F Skip or B Skip
buttons (12). Release the button when the desired part of the track is reached.
Repeat function
To repeat only one track, press the repeat button (8) until the Liquid crystal
display shows REPEAT 1.
To repeat all tracks on a disc, press the repeat button (8) until the Liquid
crystal display shows REPEAT.
To cancel the repeat function, press the repeat button (8) until the word
REPEAT 1 or REPEAT is removed from the Liquid crystal display.