Filter
Top Products
®
Page 11
Setting up your Rio
Step 2: Charging your Rio
Caution: Do not remove the rechargeable battery from the
backpack.
1 Connect the AC adapter into your Rio’s backpack port at the
bottom of the backpack.
2 Connect the AC adapter power cord into an electrical outlet. The
charge lamp on the backpack lights up when charging begins.
3 Slide the Rio power switch to On.
4 Press Menu and select Prefs > Battery > Calibrate.
Note: You do not have to calibrate the battery each time you
charge it—only the first time.
5 Wait overnight or until the timer expires to give the backpack a full
charge.
6 When charging is complete, unplug the AC adapter from the Rio.
7 Plug the headphones and headphone remote into the top of the Rio,
slide the power switch to On, and press
>/|| to listen to the Rio
introduction message.
prism.book Page 11 Tuesday, November 21, 2000 4:02 PM