Filter
Top Products
34
Re:sound L
12
Power handling capacity
The power handling capacity
stated on the type plate of your
Revox loudspeakers refers to
an amplifier with tone control
set to linear.
It is possible to use these
loudspeakers with amplifiers
rated for a higher power output.
In this case however, you must
ensure that the volume is only
turned up to a level where your
ear, which is usually a reliable
measure, starts to notice an
overload. First signs of overload
are a heavy increase in
distortions in the sound picture.
Your Revox speakers will not be
damaged by a short-term over-
load.
If the speaker chassis should be
damaged by a longer-term over-
load, this can be identified very
readily by a trained service
technician. In this case, your
rights under the term of the
Revox warranty are cancelled.
Maintenance
team by wellis uses exclusively
leather which is resistant to
stains and can be wiped clean.
This makes caring for your
Re:sound L speaker very easy.
Clean the surface of the leather
with gentle, soapy water, wipe off
with clean water and dry it well.
Then polish the leather up with a
suitable cloth.
Make sure that no water comes
into contact with the individual
speaker chassis during cleaning
or makes it way into the reflex
opening in the rear of the
speaker.
English