Recoton/Advent AW820 Speaker System User Manual


 
10
Trouble Checks and Adjustments
No Sound/ If using battery power, batteries may be low. Replace if necessary.
Distortion/
Static Check that the speaker Tuning Indicator Light is illuminated green.
If not, adjust the Tuning Control Wheel until the light changes from
red to green.
Check that the antenna is in the upright position.
Check that the Transmitter Audio Level Indicator Light is flickering
intermittently. If you are using a fixed output and the light is on
solid or flickering
very rapidly, or if the light is not on at all, adjust the
Output Level Control Wheel so that the light flickers intermittently.
or
If you are using a variable output, make sure the Output Level
Control Wheel is all the way left (as shown under ADJUST THE
TRANSMITTER), and adjust the volume on the audio source up
or down as necessary to make the light flicker intermittently.
Change the position of the Transmitter Frequency Control Wheel
to change the operating frequency. Then, readjust the speaker
Tuning Control Wheel until the Tuning Indicator Light changes
color to green.
Try changing the physical location of the transmitter. Locate it
as high and free of obstruction as possible. Avoid placing
directly on top of a TV, if possible.
Try moving the transmitter and speakers closer together.
Sending the signal through certain materials, such as glass,
tile, and metal, can decrease the effective transmitting
distance of the system.
Try changing the antenna position, particularly if you think you
may be near maximum transmitting range.
No Sound Check the left/right balance control on the audio source
from One
Speaker