Filter
Top Products
Setting Up the VCR
Startup
8
5. Select the language.
The VCR displays the on-screen menus in the English, Spanish
or French language. The word “Language” cycles through the
different languages when the VCR Main Menu is displayed on
the TV screen. The arrow indicates which language is selected.
A. Press MENU on remote to display the VCR MAIN MENU on
the TV screen.
B. Press 5 to display the LANGUAGE or IDIOMA or LANGUE
menu. (English: LANGUAGE; Spanish: IDIOMA; French:
LANGUE).
• Press 1 to have the menus displayed in English (Ingles).
• Press 2 to have the menus displayed in Spanish
(Español).
• Press 3 to have the menus displayed in French
(Français).
6. Place channels in the VCR’s memory.
The AUTO CHANNEL SEARCH feature memorizes the channel
list available through your signal type—cable or antenna. The
signal type is automatically selected when you auto channel
search. Also, if you change your signal system, you must
perform AUTO CHANNEL SEARCH again.
Wait until the channel numbers stop changing. This takes
about one to two minutes. The TV tunes to the lowest channel
found. Pressing CHANNEL up or down selects only the active
channels.
A. Press MENU to display the VCR MAIN MENU on the TV
screen. If this menu does not appear:
• Make sure the TV is tuned to same channel as the CH 3/4
switch on the VCR or the TV’s video input (refer to TV’s
manual).
• If you use a basic hookup, check the VCR indicator in
display panel — it should be on. Press TV•VCR to turn
it on.
• Check the connections.
B. Press 3 to display the CHANNELS menu.
C. Press 1 to begin AUTO CHANNEL SEARCH.
The VCR automatically selects the CABLE (cable TV) or
ANTENNA signal. For cable connection, 125 channels are
searched; for an antenna connection, 69 channels are
searched.
To change the Signal Type:
A. Follow steps A-B above.
B. Press 3 to switch the Signal Type between CABLE and
ANTENNA.
VCR MAIN MENU
1 Timer Recordings
2 Set Clock
3 Channels
4 Preferences
5 Language
LANGUAGE
Select a language.
1➛English
2 Español
3 Français
Press MENU to continue
VCR MAIN MENU
1 Timer Recordings
2 Set Clock
3 Channels
CHANNELS
1 Auto Channel Search
2 Add/Remove Channels
3 Signal Type: ANTENNA
4 Cable Box Setup
AUTO CHANNEL SEARCH
Now scanning channel 14
Press any key to cancel