Troubleshooting Guide
Compact Disc Playback
Compact Disc Playback
AVC MULTIMEDIA ("AVC") makes the following limited
warranties. These limited warranties extend to the original
consumer purchaser and is limited to non-commercial user of
the product.
One Year Parts & Labor Warranty
AVC products purchased in the United States are warranted to
be free from defects in materials or workmanship for a period
of one year from the date of their original retail purchase. If the
unit fails to conform to this warranty, we will service the product
using new or refurbished parts and products, at AVC's sole
discretion.
During a period of one year from the effective warranty date,
AVC will provide, when needed, service labor to repair a
manufacturing defect at its designated Service Center. To
obtain warranty service in the United States, you must rst call
our Customer Support Center at 1- 877- 252 - 6873, during
the hours listed in the box below. The deternination of
service will be made by AVC customer support.
PLEASE DO NOT RETURN YOUR UNIT TO AVC WITHOUT
PRIOR AUTHORIZATION. New or remanufactured
replacements for defective parts or products will be used for
repairs by AVC at its designated Service Center for one year
from the defective warranty date. Such replacement parts or
products are warranted for an additional one year from the date
of repair or replacement. The Customer will be required to ship
the unit to the Service Center indicated at the time Customer
Support is contacted to make the necessary repairs. The
customer is responsible for all transportation charges to the
service facility.
Important:
Also keep your “Bill of Sale” as proof of purchase.
Model no. ........................ Product name ...............................
Type of set ...................... Serial no. ......................................
Invoice no. ...................... Date purchased ............................
Dealer name ...............................................................................
FOR SERVICE AND REPAIR, PLEASE VISIT
www. rcaav.com.
Specications and external appearance are subject to change
without notice.
Packaging and Shipping Instruction
When you send the product to the AVC service facility you
must use the original carton box and packing material or an
equivalent as designated by AVC.
LIMITED WARRANTY
Your Responsibility
(1) You must retain your bill of sale to provide proof of
purchase.
(2) These warranties are effective only if the product is
purchased and operated in the U.S.A. or Canada.
(3) Warranties extend only to defects in material or
workmanship, and do not extend to any product or parts
which have been lost or discarded, or damage to product
or parts caused by misuse, accident, improper operation
or maintenance, or use in violation of instructions provided
with the product, or to product which has been altered or
modified without authorization of AVC, or to products or
parts thereof which have had the serial number removed
or changed.
Limited Warranty
Out of Warranty
All warranties implied by state law, including the implied
warranties of merchantability and fitness for a particular
purpose, are expressly limited to the duration of the limited
warranties set forth above. With the exception of any warranties
implied by state law as hereby limited, the foregoing warranty
is exclusive and in lieu of all other warranties, guarantees,
agreements and similar obligations of manufacturer or seller
with respect to the repair or replacement of any parts. In
no event shall AVC be liable for consequential or incidental
damages.
No person, agent, distributor, dealer or company is authorized
to change, modify or extend the terms of these warranties
in any manner whatsoever. The time within action must be
commenced to enforce any obligation of AVC arising under the
warranty or under any statute, or law of the United States or
Printed in China
811-669391W020
1. Slide the FUNCTION selector to CD. The POWER ON indicator lights up.
2. Press the
to open the disc compartment.
3. Place a disc onto the disc holder, with the label side up.
4. Press the
button again to close the CD door. The total number of tracks
will show in the CD display for a few seconds.
5. Press the PLAY/PAUSE button to start playback. The •symbol
indicating playing will appear on the screen.
TO STOP PLAYING:
(a) Press the PLAY/PAUSE button and the •indicator will ash. Press
this button again to resume playing.
(b) Press the STOP
button.
TO SKIP TO A DIFFERENT TRACK
• To skip to the beginning of the current track or previous track, press the
button.
• To skip to the beginning of the next track, press the
button.
• A short period of time will be needed for the disc to read the information of the desired track before playback can begin.
TO FAST FORWARD OR FAST REVERSE TO A PARTICULAR POINT
• To scan forward at high speed, press and hold
the
button and release it at the desired point.
• To scan backward at high speed, press and hold the
button and release it at the desired point.
• Fast forward or fast reverse will continue searching the CD until it reaches the end.
PROGRAMMABLE PLAYBACK
To Cancel Repeat Play
• Press the REPEAT button until the REPEAT indicator turns off.
Connecting with Other External Equipment
CLEANING THE UNIT
• Do not use volatile chemicals on this unit. Clean by lightly
wiping with a dry soft cloth.
• Keep the CD Drawer closed to keep dust out of the unit.
CLEANING THE CD
• If the CD skips or will not play, the disc may need to be
cleaned. Before playing, wipe the disc from the center
outwards with a clean cloth. After playing, store the disc in its
case.
IMPORTANT NOTE
• If an abnormal display indication or an operating problem
occurs, disconnect the AC adapter. Wait at least 5 seconds,
then reconnect it.
• Before transporting the unit, remove the disc from the disc
compartment.
Maintenance
Listening to the Audio Signals from the External Equipment
1) Connect the AC power cord to the wall outlet.
2) Connect the plug of the LINE-IN cable from LINE-IN
jack to the AUDIO OUT or Earphone jack of the external
equipment.
3) Slide the FUNCTION selector to the AUX position.
4) Turn on your audio equipment and play the external source.
FOR PERSONAL LISTENING
Connect headphone/earphone (Ø3.5mm stereo mini plug) to
the
PHONES jack.
When headphones are connected, the speakers are
automatically disconnected.
Note: Excessive sound pressure form earphones and
headphones can cause hearing loss.
SYMPTOM
No sound.
No sound from one channel or unbalanced
left and right volume.
Reversed left and right sound.
Lack of bass sound or imprecise physical
location of musical instruments.
Severe hum or noise.
CD
Disc in place but unit won’t play.
Disc skips.
RADIO
Poor FM reception.
Poor AM reception.
CAUSE (AND REMEDY)
• Turn VOLUME clockwise.
• The headphones are connected. Disconnect them.
• Check the speaker connections of the inoperative channel.
• Check the speaker cord connection and speaker location.
• Check the speaker connection for proper phasing - ensure that the positive terminal
from the amplier is connected to the positive terminal of the speaker.
• A TV or VCR is too close to the stereo system. Separate the stereo system from the
TV or VCR.
• Make sure the AC power cord is connected to the wall outlet.
• Make sure FUNCTION selector is set to CD.
• Make sure disc label is facing up.
• Make sure disc is clean.
• Pause mode is activated.
• Disc may be damaged or dirty; check disc.
• Make sure the unit is on a secure spot. Vibration or jarring can cause the disc to skip.
• Make sure FM antenna wire is unwound.
• Electrical interference in your home can cause poor reception. Move the unit away
from sources of interference (especially those with motors and transformers).
• Reposition or turn the main unit for better reception.
CDSTANDBY
AUXTUNER
POWERON
PROG
REPEATONE
REPEATALL
20 tracks can be programmed to play in a preset order.
1. When the unit is ON and in CD MODE, make sure the CD is STOPPED. Press the PROG button, the screen appears as below:
2. Press the
/
buttons to select the desired track. For example, to play track 3 rst, the display will look like this:
Note:
• CD, CD-R and CD-RW are supported on this unit.
• .mp3 and .WMA les are not compatible with this unit.
REPEAT PLAYBACK DURING PLAYBACK MODE
To Repeat the Current Track
• Press the
REPEAT button, the •indicator located in the right bottom corner of the screen will ash. The current track will be
played repeatedly until the STOP
button is pressed.
3. Press the PROG button to store the track in memory.
4. To add additional tracks, repeat steps 2 - 3 (up to 20 tracks).
5. To start playback, press the
PLAY/PAUSE
button.
To check the program:
• After setting, the PROG indicator lights up. Press the
PLAY/PAUSE
button to start playing, then press the
/ buttons
to check the programmed tracks.
To add additional tracks during program playback:
• Press the STOP
button, then press the PROG button repeatedly until the number of the last programmed track appears and
repeat steps 2-4 above.
To change the programmed tracks during program playback:
• Press the STOP
button, and press the PROG button repeatedly to select the number of the program, then press the /
buttons to alter the track. Press the PROG button to register the newly programmed track into memory.
To erase the whole program, do one of the following:
• Press the STOP
button twice.
• Switch the FUNCTION selector to radio mode.
• Open the CD drawer by pressing the button.
Once the whole program list has been erased, the PROG indicator will be OFF.
Note: You can use the REPEAT function during program play.
To Repeat the Whole Disc
• Press the REPEAT button twice, the •indicator located in the right bottom corner of the screen will light up. The current disc
will be played repeatedly starting from the current playing point.
POWERON
PROG
REPEATONE
REPEATALL
0
2
POWERON
PROG
REPEATONE
REPEATALL
POWERON
PROG
REPEATONE
REPEATALL
8
POWERON
PROG
REPEATONE
REPEATALL
8
POWERON
PROG
REPEATONE
REPEATALL
8
POWERON
PROG
REPEATONE
REPEATALL
0
POWERON
PROG
REPEATONE
REPEATALL
3
POWERON
PROG
REPEATONE
REPEATALL
3
When this lights up, it indicates that the unit is playing a disc.
If the disc playback is paused, it will ash.
If the STOP
button is pressed, it will disappear.
Note: When it ashes, it indicates that
the unit is playing a track repeatedly.
If it lights up, the unit will play the
whole disc repeatedly.
While creating a program track list,
the PROG indicator flashes. After
setting, it will light up.
In the event your product requires repair after the limited
warranty period has expired, please contact our Customer
Support Center at 1-877-252-6873 or
www.rcaav.com.
Hours: Monday-Thursday: 9am-7pm, Friday: 9am-5pm,
Saturday: 9am-NOON Eastern time.
Important:
You are responsible for any transportation, shipping or
insurance relative to the return of the product to our Product
Returns Center.
any state thereof, is hereby limited to one year from the date of
purchase. This limitation does not apply to implied warranties
arising under state law.
This warranty gives you specic legal rights and you may also
have other rights, which may vary from state to state. Some
states do not allow limitation on how long an implied warranty
lasts, when an action may be brought, or the exclusion or
limitation of incidental or consequential damages, so the above
provisions may not apply to you.
For more information on other products and services, please
contact our web site at www.rcaav.com.
- 15 -- 14 -
- 18 -- 17 -- 16 -