Filter
Top Products
General Controls
FRONT PANEL DESCRIPTION
POWER ON/standby
The power on/off function has two modes of
operation:
1. Manual: Press the POWER button to turn the
system on and off (When the POWER button is in
the off (OUT) position, the system does not
respond to commands from the remote control).
2. Remote ON/STANDBY: Press the POWER button to
turn the system on. The system can then be turned
off (and back on again) by remote control.
mute led indicator
1. The STANDBY/MUTE LED flashes when the audio
muting is activated.
volume (+/-)
Press the (+) or (-) button to adjust the Volume level
up or down.
surround mode
Press to select the SURROUND MODE, and the LED
indicator will light. The system will recall the previous
Pro Logic mode: NORMAL, PHANTOM or BYPASS.
AUDIO SOURCE (TV/CD/AUX)
Press repeatedly to select the input source: AUX, TV,
or CD. The corresponding LED indicator will light.
l, c, r, s. led INDICATOR
When press remote control Test Tone Key in the Pro
Logic normal mode, the LED will light in cycle:
L-C-R-S-L.
When press remote control Test Tone Key in the Pro
Logic Phantom mode, the LED will be light in cycle:
L-R-S-L.
When in Bypass, the LED won’t be lit.
To cancel the TEST TONE function, press Surround
Source button on the front panel or the remote
control except the following: CENTER LEVEL (+)/(-),
SURROUND (+)/(-), VOLUME (+)/(-) or BALANCE (+)/(-).
8
RP9990-2 10/10/00, 11:55 AM3