Filter
Top Products
TO INSERT OR REMOVE CASSETTE
1.
PWSS
STOP button to ensure tape mechamsm IS not engaged
2. Lift open Cassette Carry Door.
3. Insert cassette gently, slidmg it into the Cassette Carry Door with expos-
ed tape upward. and the full reel of tape to the right (toward the tunmg
knob).
4. Close the door.
TAPE PLAY
1. Set VOLUME to minimum.
2. Plug headphone into jack on cabinet side, Insert cassette, and then
press PLAY.
3. Adjust VOLUME. Increase only after headphone iS in place for listening.
4. To turn unit off, press STOP
5. To skip over a portion of the tape, press F-FWD. Use STOP after you
have advanced to the desired point on the tape.
6. To run the tape backwards, press REWIND. Press STOP after you have
rewound to the desired point.
AUTOMATIC STOP
When the end of the tape is reached in PLAY mode, the unit will automatically
shut itself off and return the button to the “off” position.