MUTE
BASS/TREBLE
VOLUME
LEVEL
HOME THEATER AUDIO VIDEO RECEIVER
PHONES
TUNING MEMORYFM/AM SETUP TEST TONE EQ DIGITAL INPUT
ST / MONO
OK
SURR MODE
DSP MODE
SOURCE
VIDEO
V-AUX
L - AUDIO - R
SOURCE
ON/STANDBY
Operating Your Receiver
Receiver Controls
1. STANDBY/ON
To turn the unit on/ off. When the system is turned on, the unit
will go to the mode it was in before powered off.
2. MUTE
To mute speakers and headphone out.
3. PHONES
Plug your headphones (not supplied) into it for your private
enjoyment. Speakers will be off when phones are inserted.
4. Source Buttons
To select sound source. For example, CD, SAT, Tuner etc.
5. Display
To display current status of the receiver.
6. Sound Control
Let you adjust the sound – volume, treble, bass & level.
• To change the VOLUME, turn the large knob.
• To adjust TREBLE or BASS, press relevant button and turn the
knob.
• Bass/Treble can only be activated under stereo mode.
Bass/Treble effects are only active when there is no custom
EQ effect. When pressing BASS/TREBLE, the unit will auto-
matically go to EQ OFF mode.
• To change the volume of individual speaker, press LEVEL but-
ton repeatedly to select the speaker, then turn the knob to
adjust the level.
7. DSP (Digital Sound Processor)
Press this button to select the DSP mode
(STADIUM/THEATER/CONCERT/CLUB/CHURCH/ARENA/DSP OFF)
you want.
8. SETUP FUNCTION
• To adjust the speaker size, speaker distance, speaker phase,
night mode, sleep and display dimmer.
• In SLEEP mode, you can set the receiver to turn off from 5 to
120 minutes.
9. TUNING
Press for about 2 seconds to search for next station.
Press once to review all preset stations in preset mode.
In normal mode, press to increase/decrease tuner frequencies.
10. SURR. MODE
Press repeatedly to select the surround mode you want. ( refer
to “Advanced Sound Control” on page 20)
11. MEMORY
Press to toggle between manual tuning mode and preset sta-
tion mode, Press and hold to manually store tuner station in
preset mode.
12. FM/AM
Press to choose between FM/AM in TUNER mode.
Press and hold to automatically search and save preset stations
(FM only).
FM/AM button can only switch tuner bands and can not select
Tuner source.
13. TEST tone
When pressing it briefly, a short noise (test tone) will be gener-
ated in the speakers one by one so that you can adjust the vol-
ume of individual speaker. (See page 9 for details)
14. EQ
Press repeatedly to select the desirable EQ mode (music style) –
FLAT, ROCK, POP, JAZZ, CLASSIC, VOCAL. Your choice will be
saved automatically.(Only available in Stereo mode)
15. DIGITAL INPUT/ ST / MONO
Press repeatedly to select the input device (analog / optical /
optical 2 (RT2600 only) / coaxial). In FM mode, press to toggle
between stereo and mono.
16. V-AUX Input
For convenient use of your digital camera, family game
machines, second VCR, etc.
1
2 3 4 7
6
8
9
10
11
12
13 14
15
16
5
10