EN
EN
Volume
Wx
TV
Setting the Countdown Timer
1. Press TIMER ON/OFF to enter timer setting
mode.
The red TIMER icon will flash on the display.
2. To select countdown time, use the
/ buttons to select the correct time.
Press and hold to fast reverse or fast forward
countdown time.
3. Press TIMER ON/OFF again to activate the
timer. The unit will beep twice to indicate
countdown has started. Remaining time
shows on the display.
The red TIMER icon will remain lit during
countdown.
4. Press TIMER ON/OFF to turn timer off at any
time or after it has sounded.
Radio
12
Built-In AFC
The Built-In Automatic Frequency Control (AFC)
works only on FM. It helps to reduce drift on FM
reception and to keep the radio locked in on the
FM station to which it is tuned.
Antennas
AM Antenna - A built-in ferrite rod antenna
eliminates the need for an outside antenna for
AM reception. Rotating the unit slightly may
improve reception of distant AM stations.
FM Antenna - The power cord acts as your FM
antenna. The power cord picks up moderate to
strong stations and eliminates the need for an
external antenna in most strong signal areas. Be
sure the power cord is stretched out to its full
length. Do not coil or bunch the cord together.
Changing position of the power cord may
improve reception.
Turning on the Radio
Press RADIO ON / BAND to turn on the radio.
Turning off the unit
Press OFF to turn off the radio.
Adjusting Volume
Press VOL - to decrease volume level.
Press VOL + to increase volume level.
Selecting Radio / TV Band
Press RADIO ON / BAND to select between FM,
AM and TV band.
Tuning to a Station/Channel
Press to tune down radio frequency or
select the previous TV channel.
Press to tune up radio frequency or select
the next TV channel.
Automatic Station/Channel Search
Press and hold or for more than 1
second and release to start automatic station/
channel search in the direction selected.
Search will stop once a station is found.
Note:Note:
Note:Note:
Note:
The display will return to the clock
time after displaying the station fequency or
channel number for a few seconds. To view
the current station frequency or channel
number, press
or .
Tips:Tips:
Tips:Tips:
Tips:
Press or to quit automatic station/
channel search.
Display
Settings
Setting the Time
The time display has a 12-hour format with AM
and PM indicator. To set the time:
1. Press (inside battery compartment) to enter
time setting mode.
The red Clock icon will appear on the
display.
2. To set clock time, use the / buttons to
select the correct time.
Press and hold to fast reverse or fast forward
clock time.
3. Press again to save clock time. The red
Clock icon will turn off.
Note:Note:
Note:Note:
Note:
The radio or CD player is muted when alarm
turns on.
11
Tips:Tips:
Tips:Tips:
Tips:
In standby mode, press / to
show the seconds counter.
Radio frequency
unit
AM/PM time
indicator
Time/ countdown time /
radio frequency
Radio
band
In CD mode, shows
track number;
In tuner mode,
shows memory
location.
Playback modes:
Shuffle, repeat track,
repeat disc
Daylight Saving
Time indicator
Volume indicator
In clock setting mode
indicator
Countdown timer
indicator
Bass
indicator
Weather Band
TV Band