Filter
Top Products
6
1. radio on•off button. Press to turn
FM radio on and off.
2. fm tuning Buttons. Press to
search your favorite radio station.
3. preset down button. Press to
access previous preset station.
4. preset up button. Press to
access next preset stations.
5. p (preset) button. Press to set pre set
stations.
6. m/ st•mono button. Press to select
stereo or mono mode for receiving
stereo FM broadcast.
7. seek button. Press seek to enter
auto tune mode.
THE CD PLAYER
To check the program, press play and
.
Program is cancelled once you press
stop. To reactivate program playback,
Press P, then play .
PAUSE
Press play/pause to suspend
playback The minutes and secondes flash
when interrupted.
STOP
Press stop to stop playback.
The player switches off automatically
after 30 seconds or press stop key twice
to turn off your CD player.
BASS BOOST
Press bass boost to select between bass
boost 1, bass boost 2 and off.
LOCK
Slide the control button to HOLD to
lock buttons in order to prevent
accidental activation.
THE RADIO
b
a
s
s
b
o
o
s
t
s
t
•
m
o
n
o
m
p
STEREO
20 PRESET
STATIONS
f
m
t
u
n
i
n
g
s
e
e
k
r
a
d
i
o
o
n
•
o
f
f
CD-R / RW COMPATIBLE
s
e
c
o
n
d
t
r
a
c
k
minute
p
r
e
s
e
t
s
t
a
t
i
o
n
bass boost 12
1
MHz
preset
P
seek
FM
esp x
1
2
2
3
4
5
6
Resume
When you power off the unit (without
disconnecting power supply), Resume is
automatically
activated. It stores the following settings
and modes: Mode (Repeat/Repeat All/
Random), EQ setting (Bass Boost) and
ESPX. When play mode is on again, the
unit resumes to the settings.
To automatically store current track
when you stop CD play, press STOP but-
ton twice.
Repeat and Random Playback
You can replay the entire CD or one
track as many times as you want;
Press m repeatedly to
1. Replay the entire disc;
2. Replay the current track;
3. Random playback
4.Press repeatedly until no repeat or ran-
dom play icons show on display for de-
selection.
Program
This function lets you listen to the tracks
you selected in the order you want. The
CD player must be in Stop mode.
1. Press P. P will be flashing on the
display.
2. Select the track to be stored by press-
ing skip back or skip
forward.
3. Press P again to confirm and store.
4. Repeat steps 2-3 to store other tracks.
5. Press play button to listen to your
programming.
You can program up to 24 tracks.
Note : The unit switches off
automatically after 30s if no key has
been activated to prevent excessive
battery consumption. During
programming, the unit can switch off if
you do not press any key within 30s.
• To play your program, press play. P
will be displayed.
• To add tracks to the program, enter
STOP mode and press the P button
again. Refer to steps 2-3 of the above.
• To edit program, enter STOP mode and
press the P button. Press P repeatedly to
select the program number you want to
edit. Follow steps 2-3 above to select
track.
THE CD PLAYER
5
EN
1
2_RP2430/32 EN 8/28/01 2:22 PM Page 10