RCA A3400 Stereo System User Manual


 
5
EN
Display
Showing the Demonstration
Not operational in CD mode. Press DEMO/DIMMER
to turn on/off demonstration mode. The demonstra-
tion scrolls through all display operations.
DISPLAY ALARM/CLOCK
Setting the Time
1. Press CLOCK until the time flashes on the display
(12-hour clock for RCA, 24-hour clock for Thomson).
2. Rotate MULTI JOG to set the hour and then press
SKIP FORWARD to shift to minute digits.
3. Rotate MULTI JOG to set the minute.
4. Press SET to save settings and STOP to quit set-
ting.
Note: When system is ON, you can press CLOCK to
display the current time for about 2 seconds.
Setting the Timer
1. Press TIMER until the ON and clock time flash on
the display ( ON - timer on time ) (12-hour clock for
RCA, 24-hour clock for Thomson).
2. For setting time, rotate MULTI JOG to set the
hour and then press SKIP FORWARD to shift to
minute digits.
3. Rotate MULTI JOG to set the minute.
4. Press SKIP FORWARD to change to OF (timer off
time) with clock time flashes. Repeat steps 2 & 3 for
timer off time setting.
5. Press SET to save settings and STOP to quit set-
ting.
Activating the Timer
Press and release TIMER to turn on/off
the alarm. The alarm is active when the
clock icon indicator is lit.
Adjusting the Display Brightness
1. Press and hold DEMO/DIMMER for more than 2
seconds.
2. While the dimmer is dis-
played, rotate MULTI JOG to
select the desired level (DIMM
0 - 3).
Sleep Mode
You can select the time interval in minute before the
unit turn off automatically. Press SLEEP on the
remote to select among 5,15, 30, 45, 60, 90 & 120
minutes.
BASS
SURROUND
DIM 2
Tip: DEMO
Mode does
not affect the
current system
operation. When the
system is initially plugged
in, DEMO mode is acti-
vated.
2520 IB US ENG 1/12/00 3:36 PM Page 9