Filter
Top Products
15
If a video cassette is already in the VCP,
press
POWER
to turn on the VCP then
press
PLAY
to start playback.
3. To stop the tape during play, press
STOP
(
STOP/EJECT
on the front panel).
The PLAY indicator turns off and the
tape stops.
To start playback again, press
PLAY
.
4. To eject the tape, press
EJECT
(
STOP/
EJECT
on the front panel). The TAPE
indicator flashes, then turns off and the
VCP ejects the tape.
5. Press
POWER
to turn off the VCP. The
POWER indicator turns off.
ON-SCREEN DISPLAY
You can make your VCP display the current
operating mode and tape speed when you
change the operation mode. Follow these
steps to activate this function.
1. Press
MENU
. The following appears on
the TV screen.
2. Press
SELECT
or
to highlight
F.OSD
.
3. Repeatedly press
OK
so
ON
appears next
to
F.OSD
.
4. Press
MENU
to exit.
Note:
If you do not press any key for a few
minutes, the VCP automatically exits the
menu mode.
The current operation mode appears on
display when you change the operation
mode, then automatically disappears in
about 3 seconds. When you activate the auto
repeat playback function,
AUTO
REPEAT
also appears on the TV screen. See “Auto
Repeat Playback” on Page 17.
To view the real time counter, press
DISPLAY
. Press
DISPLAY
again to clear the
counter.
To disable the on-screen display, simply
repeat the above steps and select
OFF
at
Step 3.
FAST-FORWARD/
REWIND
To fast-forward or rewind the tape at high
speed, with the tape stopped, press
FAST-F
or
REWIND
. The FAST-F or REWIND
indicator lights and the tape fast-forwards or
rewinds.
No picture appears on the TV/monitor when
you fast-forward or rewind the tape from a
stopped position.