Filter
Top Products
18
To Auto-Search Channels for the VCR’s Channel Memory
If you do not use the Interactive Guide follow the directions below to place only the active
channels in the VCRÕs channel memory.
VCR MAIN MENU
1 VCR Plus+ Programming
2 Timer Programming
3 Review Programs
4 Channel Setup
5 VCR Setup Options
VCR MAIN MENU
1 VCR Plus+ Programming
2 Timer Programming
3 Review Programs
4 Channel Setup
CHANNEL SETUP
1 Auto-Search Channels
2 Add/Remove Channels
3 Tuning Mode: CABLE
SETUP OPTIONS
1 Interactive Guide
SETUP
The setup procedure
will help you configure
your VCR. Would you
like to begin the
setup procedure now?
1 Begin setup
2 Cancel
CH 14
Searching Channels
There are several setup feature options for your VCR. The VCR has an Interactive Guide that
will take you step-by-step through the setup options for your VCR. For complete operating
information about your VCR, see the VCR userÕs guide.
Setting Up the VCR Using the Interactive Guide
1. Press VCR1 to turn on the VCR, audio/video receiver,
TV, and tune the TV to channel 91 (Input 1). This also
sets the remote to control the VCR.
2. Press MENU/PROGRAM on the remote to see the VCR
MAIN MENU on the TV screen. Then press 5 to display
the SETUP OPTIONS menu. Press 1 to display the first
screen for the Interactive Guide.
3. Press 1 to Begin setup. Just follow the directions on
the screen.
1. Press VCR1 to turn on the VCR, audio/video receiver, TV,
and tune the TV to channel 91 (Input 1). This also sets
remote to control the VCR.
2. Press MENU/PROGRAM on the remote to see the VCR
MAIN MENU on the TV screen.
3. Press 4 to display the CHANNEL SETUP menu.
4. Press 1 to begin Auto-Search Channels.
¥ Wait until the channel numbers stop changing. This
takes about one to two minutes. The VCR will then tune
to the lowest channel found. Pressing CHANNEL up or
down on the remote will select only the active channels.
¥ The VCR will automatically select ANTENNA or CABLE
for the Tuning Mode feature in the CHANNEL SETUP
menu. If you need to change the setting manually,
press 1 while in the CHANNEL SETUP menu.
Setting Up Your VCR
Note: If you use the interactive guide to set up the VCR,
when finished you can skip forward to page 20 of this
UserÕs Guide.