Filter
Top Products
To mount the speaker to the bracket, screw the supplied mounting knobs into the
holes shown below (screw mounts), then tighten with a flat blade screwdriver.
Attach the speaker wire observing polarity, and then fit the mounting knobs into
the speaker mount opening of the bracket (shown in the illustration on the previous
page. The speaker will mount centered when the mounting knobs are slid into place
on the bracket in the direction shown by the arrows in the illustration below.
TIP: Prior to actually mounting your speaker, you may want to assemble the
mounting knobs and bracket to the speaker to gain a better understanding of how
the pieces work together.
NOTE: When
mounting in a
vertical position,
the speaker should
always slide down
onto the bracket.
Both silver and
black grilles are
supplied in the
original shipping
box. Select the
grille which best
matches the décor
of your monitor
and the room and
attach it to the
speaker.
Speaker Mounting
6