Filter
Top Products
Page 6
Attaching Speaker Cables
When using a banana jack to attach
speaker cables to the binding post
terminals, insert the speaker cables
into the banana jack. Next insert the
banana jack into the hole provided in
the top of the terminal. Repeat for the
other speaker cable(s) as necessary.
If not using a banana jack, simply
loosen the binding nut to allow the
hole in the side of the terminal to
become exposed. Strip ¼-inch of
the insulation from the end of the
speaker cable and insert the exposed
wire end into the now exposed hole
in the side of the terminal. Tighten
the binding nut by turning the nut
clockwise until the speaker cable
is secured. Repeat for the other
speaker cable(s) as necessary.
Standard Wiring Diagram
Bi-amplifying Wiring Diagram
NOTE: Connecting
strapes must be
removed before
bi-amping or
bi-wiring.
Attaching Speaker Cables
To Tweeters
and Mid-range
To Woofers