Filter
Top Products
29
Using the Remote Control
Receiver/Amplifier Operation
Before operation, press
TUNER
to select receiver/amplifier operation.
STATION
Tunes to the next higher or lower memory location.
BAND
Selects the AM or FM tuner band.
TUNING
Tunes to radio stations.
MPX
Selects the FM reception mode.
CLASS
Selects the memory class.
DIRECT ACCESS
Allows direct input of the station frequency.
Number Buttons
Select the corresponding memory station. During Direct Access,
enter the station’s frequency.
– SW LEVEL+
Controls the sound level of the subwoofer when pressed after
SURROUND.
– REAR RIGHT LEVEL+
Controls the sound level of the rear speakers when pressed after
SURROUND
.
TEST TONE
Sounds test tones from each speaker when pressed after
SUR-
ROUND
.
– REAR LEFT LEVEL+
Controls the sound level of the rear speakers when pressed after
SURROUND
.
CENTER MODE
Selects among the three center modes or 3CH Logic when
pressed after
SURROUND in Dolby Pro-Logic mode
.
–
CENTER LEVEL
+
Controls the sound level of the center speaker when pressed af-
ter
SURROUND
.
DELAY TIME
Sets the rear-channel delay for Dolby Pro Logic Surround pro-
grams when pressed after
SURROUND
.
–
EFFECT
+
Adjusts the level of DSP mode.
SURROUND
Sets the remote control into the surround setup mode.
PRO LOGIC
Selects Dolby Pro Logic Surround.
DSP MODE
Selects the DSP mode; HALL, JAZZ, DANCE, THEATER 1, or
THEATER 2.
MUTING
Silences the receiver. Press again to restore the sound to its pre-
vious level.
VIRTUAL
Selects virtual surround mode; DOLBY VIRTUAL, SRS1, or
SRS2.
5-D THEATER
Selects 5-D Theater mode.
+
MASTER VOLUME
–
Adjusts the system’s volume.
RECEIVER POWER
Turns the receiver on and off.
FUNC
Selects a program source (VCR, PHONO, tuner, CD, DVD/TV, or
LD/SAT). Repeatedly press until the display shows the desired
program source.
DIRECT
Bypasses the receiver’s audio control circuits. Press again to re-
store the previous settings.
CONTROL
MODE
Receiver/
Amplifier
Buttons
TUNER