Filter
Top Products
11
Preparation
before you disconnect it from the cas-
sette player.
Follow these steps to connect the cas-
sette player to AC power.
1. Set the adapter’s voltage switch to
3V, if necessary.
2. Insert the Adaptaplug into the
adapter’s cord so it reads + TIP.
3. Insert the plug into the cassette
player’s
DC 3V jack.
4. Plug the adapter into a standard AC
outlet.
Using Vehicle Battery Power
You can power the cassette player from a
vehicle’s 12V power source (such as a
cigarette-lighter socket) using a 3V, 250-
mA regulated DC adapter and a size A
Adaptaplug (neither supplied). Both are
available at your local RadioShack store.
Cautions:
• You must use a power source that
supplies regulated 3V DC and deliv-
ers at least 250 mA. Its center tip
must be set to positive and its plug
14-1250.DS.fm Page 11 Tuesday, May 16, 2000 2:32PM