Filter
Top Products
Live sound reinforcement, speech and vocals, music playback in entertainment, A/V, and institutional venues -
especially when ease of use and portability are important factors.
PPHP1594 PPHP1595
ABOUT THE PPHP1594 PPHP1595
2
ABOUT THE PPHP1594 PPHP1595
15" low-frequency driver with dual neodymium magnet for low-distortion and light weight.
Parallel Speakon connections allow daisychaining of a second speaker.
Integral 35mm pole mount receptacle with securing thumb screw.
Multi-angle enclosure for front of house or stage monitor application.
Extended low-frequency performance. Delivers powerful bass down to 40Hz.
Features
Applications
Loudspeaker Placement and Mounting
The following guidelines will help you achieve optimum sound wherever you use your PPHP1594 PPHP1595 loud-
speakers:
Raise the speakers as high as possible. For best results try to get the high frequency horn at least 2 to 4 feet above the
heads of the audience. If the speakers are too low, the people in the back of the audience will not receive the best quality
of sound.
Place the speakers between the microphones and the audience. Feedback occurs when the microphones pick up sound
from the speakers and "feed" the sound back through the sound system. If space is limited, point the speakers away
from the microphones to reduce feedback.
Locate the speakers away from turntables. Low-frequency feedback occurs when the output of the speaker is picked up
by the tone arm of the turntable and is re-amplified. A heavy, solid turntable base and shock mounting can also reduce
this type of feedback in DJ applications.
Use more speakers in large or highly reverberant spaces. Spreading speakers throughout these spaces will produce
much better sound than trying to compensate with loudness level or equalization. For very long distances, the use of
another set of speakers on a delay is recommended.
Stand speakers upright for PA-Tilt the speakers back for stage monitoring. Upright stance Provides even Coverage over
a wide, PPHP1594 PPHP1595 speakers ane also designed with two slanted Positions for stage monitoring applications.