Filter
Top Products
35
Using DTMF Auto Send
If you turn on the DTMF auto-send feature, the HTX-242 automat-
ically sends the sequence stored in the currently-selected DTMF
memory every time you press PTT.
Follow these steps to turn on auto send.
1. Press
VFO
.
2. Hold
F
for at least 1 second.
FUNC
flashes.
3. Press
MR
.
4. Repeatedly press
▲
to select the
dA
option. Then rotate
TUNE
, or press
UP
or
DOWN
on the microphone, to set the
option to
on
.
5. Press
MR
or PTT to save the setting.
6. Press
DTMF
so
DTMF
is on the display.
To temporarily turn off auto send, press
DTMF
so
DTMF
is not on
the display. To turn off auto send, set the option to
oFF
in Step 4.
Notes:
•
This feature works with the DTMF page feature. If you stored a
sequence in DTMF Memory 0, the HTX-242 does not pass trans-
missions to the speaker until it receives that sequence. After the
transmission, DTMF squelch is still turned on.
•
If there is no sequence stored in DTMF Memory 0, the HTX-242
still transmits the currently selected DTMF memory sequence
each time you press PTT, but passes all transmissions to the
speaker.
!