Filter
Top Products
10
1. Load a blank cassette tape, or
one you want to record over, into
the cassette compartment.
2. If the external microphone has
only a
1
/
8
-inch plug, insert it into
the recorder’s
MIC
jack.
If the external microphone has
two plugs and an on/off switch,
you can remotely control the
CTR-94 from your microphone.
Insert the microphone’s
1
/
8
-inch
plug into the recorder’s
MIC
jack,
and the smaller plug into the
REM
jack.
3. Press
RECORD
to begin record-
ing. Both
PLAY
and
RECORD
lock down.
Note:
To temporarily stop record-
ing, press
PAUSE
on the recorder
(or
OFF
on the microphone). To
resume recording, press
PAUSE
again on the recorder (or
ON
on
the microphone).
4. Speak into the external micro-
phone.
5. Press
STOP/EJECT
to stop
recording.
Recording from an External
Audio Source
You can record directly from an ex-
ternal audio source, such as a radio,
tape deck, or CD player, using a suit-
able patch cord (not supplied) with a
1
/
8
-inch plug.
Note:
Before you connect an exter-
nal audio source to the recorder, be
sure the source’s and the recorder’s
volume controls are set to their mini-
mum setting.
1. Load a blank cassette tape, or
one you want to record over, into
the cassette compartment.
2. If you connected an external
microphone, disconnect it.
3. Connect your external audio
source to the
AUX
jack, using an
optional patch cord with a
1
/
8
-
inch plug at one end and the
appropriate plug at the other end
that matches your audio
source’s output jack.
4. Start the sound source and set
its volume to a normal listening
level.
EAR AUX REM MIC MIN – VOLUME – MAX
EAR AUX REM MIC MIN – VOLUME – MAX
14-1107.fm Page 10 Thursday, July 1, 1999 11:15 AM