Radio Shack AM/FM Stereo Auto Reverse Cassette Recorder Cassette Player User Manual


 
9
CASSETTE PLAYER OPERATION
LOADING A CASSETTE TAPE
1. Take up any slack in the tape by
turning the cassette’s hub with a
pencil. If you do not remove
excess slack, the tape might
become tangled in the record/
playback mechanism.
2. Press STOP/EJECT to open the
cassette compartment door.
3. Load the cassette with its open
edge facing up, its full reel to the
right, and the desired side
toward you.
4. Gently close the compartment
door.
PLAYING A CASSETTE TAPE
Warning: To protect your hearing, set
VOLUME MIN/MAX to its lowest set-
ting before you begin playing a cas-
sette tape.
1. Set FUNCTION to TAPE.
2. Load a cassette tape.
3. Set MODE as follows:
For one-time play, press
MODE so the button locks
down. When the tape reaches
the end of the first side, it
automatically reverses direc-
tion, plays the second side,
and then stops.
For continuous play, press
MODE so the button releases.
Each time the tape reaches
the end of a side, the tape
direction reverses and play
continues on the other side
until you press STOP/EJECT.
4. Press PLAY.
14-729.fm Page 9 Wednesday, June 30, 1999 5:27 PM