Filter
Top Products
True to the Music
Radial Engineering Headbone Owner’s Manual
Congratulations on your purchase of a Radial Headbone!
As part of the growing family of Tonebone products, the Headbone is de-
signed to open doors to creative new sounds and provides the discerning
guitarist with greater options on stage and in the studio with a simple, yet
extremely versatile interface.
The Headbone is designed to connect two amplifier heads to one speaker
cabinet and switch between amplifiers with a footswitch. The Headbone
uses pure Class-A electronics under digital control for the hi-impedance
guitar signals and hi-power speaker signals. Add Slingshot™ remote
control and you get a true marvel whose time has come! Best of all, the
Headbone is engineered to ensure the safe operation of either tube (VT)
or transistor (SS) amps.
To take advantage of all of the wonderful features that have been in-
corporated into the Headbone, please take the time to read through
this manual before you use it. This will give you a broader sense of the
Headbone’s capabilities and ensure its safe and proper operation. If you
have questions that are not covered here, please visit the FAQ section
on our web site. This is where we post answers from questions that come
from users. If you have a question that is not covered there, please feel
free to send us an email at info@tonebone.com and we will do our very
best to respond as quickly as possible.
Start your engines!
RADIAL HEADBONE™ OWNER’S MANUAL
Table Of Contents Page
Caution Statement & Legal Disclaimer ..............................Inside cover
Introduction ................................................................................1
Feature Set ................................................................................3
Quick Start .................................................................................5
Getting To Know Your Headbone ..............................................7
FAQ ...........................................................................................11
Warranty ............................................................................Back cover
Radial Engineering is a division of JP CableTek Electronics Ltd.
Radial Headbone Owner’s Manual - Part # R800 9680 00 • V1.0 06-20-04
Specifications and appearance are subject to change without notice.