Filter
Top Products
3
HF-63X1 and HF-63X2 Specifications (subject to change without notice)
Frequency Range: 1,300 - 16,000 Hz (-6 dB)
Nominal Coverage: 90° horizontal X +15 to -35° vertical (50° total, adjustable mount provides for vertical plane adjustments. The hori-
zontal plane can be adjusted by altering mounting position on the low frequency enclosure before tightening bolts.
DI: 9.0 dB (600 to 16,000 Hertz average)
Q: 8.0 (600 to 16,000 Hertz average)
SPL (peak): HF-63X1 with LF-3115: 123 dB
HF-63X2 with LF-3215: 126 dB
Impedance: HF-63X1 with LF-3115: 8 Ohms nominal
HF-63X2 with LF-3215: 4 Ohms nominal
Maximum Input Power: HF-63X1 with LF-3115: 150 W
(2 hours EIA 426B) HF-63X2 with LF-3215: 300 W
Sensitivity: HF-63X1 with LF-3115: 95.0 dB
HF-63X2 with LF-3215: 97.5 dB
Crossover Frequency: 1,300 Hz
Connectors: Barrier strip screw terminals accept up to #10 AWG stranded wire. Six terminals: Two full-range input terminals,
two HF OUT terminals (factory wired to compression driver), and two LF OUT terminals with factory supplied wiring
for connection to QSC LF-3115 or LF-3215 low frequency loudspeaker.
Transducers: 1.5” (38mm) exit, 2.5” (63.5mm) titanium diaphragm compression driver.
Mounting Hardware: Attaches to top of the LF-3115 or LF-3215 low frequency cabinet using three 5/16”-18 x 3/4” long bolts.
Size: 30” wide X 16” high X 20” deep (762mm X 406mm X 508mm)
Weight: 50 lbs. (shipping), 40 lbs. (net), 22.7/18.4 kilograms