Filter
Top Products
Utility Select Menu Descriptions
TOP MENU
UTILITY SELECT MENU
Network Setup Use this sub menu to configure the NAC-100 on the network.
Security Access Use this sub menu to disable/re-enable Control Password restrictions.
LCD Contrast Adjust Use this sub menu to adjust the contrast of the NAC-100 LCD screen.
Basis Connection Status Use this sub menu to check the status of any Basis unit controlled by the NAC-100.
System Information Use this sub menu to read the system information of the NAC-100.
Reboot/Restart Restarts the NAC-100.
Restore Factory Default Restores factory defaults and restarts the NAC-100.
SUB MENUS
NETWORK SETUP UTILITY (Read/Write)
IP Address: The NAC-100 IP Address
Subnet Mask: The NAC-100 Subnet Mask
SECURITY ACCESS
All Control Items Unlocked The default screen if none of the user configured Control Items are restricted using the
Control Password.
-or-
Press Blue Key This option disables Control Password restrictions for all Control Items.
To Disable Security
↓
All Control Items Unlocked Control Password restrictions have been disabled for all Control Items.
-or-
Press Blue Key This screen appears if user access passwords have been previously disabled.
To Re-enable Security This option will re-enable Control Password restrictions for all Control Items.
↓
All Control Items Locked Control Password restrictions have been re-enabled for all Control Items.
CONTRAST ADJUST
Contrast: Range of 1-10, with 10 being the brightest.
BASIS CONNECT STATUS (Read Only)
Basis Index: Basis Index – Change this number to view each of the Basis units controlled by the NAC-100.
IP Address: Basis IP Address
Status: Connection Status
Name: Basis Name
Model: Basis Model
SYSTEM INFORMATION (Read Only)
NAC-100 Name: The name of the NAC-100
Firmware Version: Current Firmware Version
Serial Number: Serial Number
REBOOT / RESTART
System will now reboot…
RESTORE DEFAULT
--Caution!!--
This will erase all screens
and bitmaps, replaced with
factory default memory settings
Press Blue Button to Start