Filter
Top Products
13
WL3082 Specifications
Frequency Response: 68 - 18,000 Hz (+/- 3 dB)
Frequency Range: 62 - 20,000 Hz (-10 dB)
Maximum SPL (continuous/peak): HF: 127/133 dB LF: 122/128 dB
Nominal Coverage (-6 dB included): Horizontal: 140 degrees (500 Hz to 3.2 kHz)Vertical: dependant on cumulative splay angles
Transducers:
High Frequency: Single 85W, 16 Ohm, 1.4 inch exit, 3 inch composite polyimide diaphragm, neodymium magnet
Low Frequency: Dual 250W, 16 Ohm 8 inch cone transducer, 2 inch voice coil, neodymium magnet,
weather resistant cone
Acoustic Crossover Frequency: High to Mid: 1250 Hz Mid to Low: 300 Hz
Input Sensitivity: HF: 108 dB
LF: 98 dB
Weight: Net: 38 lb (17.3 kg) Shipping: 45.5 lb (20.6 kg)
Enclosure: 15mm Baltic birch plywood (baffle is 18mm Baltic birch plywood)
Grille: Steel (16 gauge) with cloth
Connectors: Two (2) Neutrik NL8 in parallel (wired as shown in Table 2)
Working Load Limit Information:
Component Weight 7:1 Design Factor 10:1 Design Factor 12:1 Design Factor
WL3082 Loudspeaker 38 lb
(17.3 kg)
651 lb
(296.1 kg)
456 lb
(207.3 kg)
380 lb
(172.7 kg)
16”
(406mm)
21.7”
(551mm)
19.9”
(505mm)
19.6”
(497mm)
11.8”
(300mm)
9”
(228mm)