Filter
Top Products
You have to plug the system
off
the main
power
after
each use.
System
works
on
DC
p-ower..
1.Turn on the main switch to ON and the
power
LED will
indicate
the
battery
works well.
2.You may use the car cigarette light power connector
to connect the car and the main receiving machine
or use
an
external 12V DC power connector to
connect the main receiving machine
and
the external
12V battery to supply power source to the main
receiving machine.
Warning:After
use
it,please
make
sure
to
switch
the
main
power
to
OFF
to
avoid
battery
damaged.
"tiI·'"7
,'0
output
Connector
The replacement
of
AC power and recharged is needed in case
of
"--
__
---' weak built-in batteries power
and
occurrence of noises
and
interruption
of
voice while using DC built-in batteries power.
Warning: Be sure
to
switch
off
the system main
power
after use, otherwise
the
battery
will
be
over
discharged
and
it
can damage the Lead
Acid
rechargeable
battery
and
shorten
the
battery
life
dramatically.
How
to
use
the
Lavalier MicroRtione
1.
Open the battery compartment by sliding up the cover.
2.
Put the battery into the compartment with correct polaritY,and close the cover.
3.
Plug the Lavalier microphone part to the jack.
4.
Switch
on
the power
of
the transmitter and when the LED shows,it is ready
to work.