PYLE Audio PWMA110 Stereo Amplifier User Manual


 
OPERATION INSTRUCTIONS
!
CAUTION
RISK OF ELECTRIC
DO NOT OPEN
AC IN: 120V/60Hz
AC Fuse: 1A/250V
OUTPUT POWER(MAX) 100W
DC12-15V
16
17
18
19
20
21
15
RECHARGE
15. Rechargeable battery
compartment
16. Compartment for AC cord
17. AC Input jack
18. Fuse
19. Stand mounting hole
20. Battery compartment
21. DC input jack
22. Charge LED indicator
23. Rating label
22
DC+12V
1. Confirm the power
1) AC power (17 ): Before use , please make sure the voltage of
power supply is the same as that indicated (23) on the amplifier.
Or it will cause damage to the system.
2) DC Input (21): DC power can be connected to DC input jack. If
car power is used , the voltage should be 12V-15V. Please pay
attention to correct polarity(negative/positive).
Remark: When insert the DC plug to DC input jack, the battery
power is cut off automatically.
3) Battery power(20):
This unit can also be powered by 8pcs "D"
Remark: Low battery power and voltage will cause distortion and
short reception distance.
2. Before turn on the main unit , please turn Echo, treble, bass and
all volume controls anticlockwise to minimum. Then switch it on.
After signal is input or wireless microphone is turned on, then
adjust the volume to a suitable level. Adjust ECHO, BASS,
TREBLE controls to reach the idea sound quality.
size alkaline batteries
(SUM-1)
PARTS DESCRIPTION
23
-3- -4-
Rear