Filter
Top Products
5
Panel Information _________________________________________________________________
1 3 4
6
7
9
10
11
12
2
8
5
POWER
PHONES
PHONO
DVD
CD
TAPE TUNER/BAND FLAT
POP
CLASSIC ROCK
MODE/STORE TUNING
VOLUME
R
RESET
AV RECEIVER PT-680A
EQUALIZER
SURR.
SOUND
1. Power key
This switch turns the power ON/OFF (STANDBY).
2. Remote Standby Indicator
The Power Amplifier is in remote standby state if the remote
standby indicator is lighted.
3. Mode/Store
When in tuner mode, press this button once to select Auto tuning
mode; press it the second time to select the Manual tuning mode;
press it the third time to select the Preset tuning mode, then by
pressing the Tuning +/- button to select a preset station; pressing
and holding this button (in any of the modes above) for 5 seconds
brings up the “MEM” icon and display the next available preset for
storing the current frequency.
4. Tuning +/- key
Frequency up and down.
5. Remote sensor
Work with the remote control.
6. Volume Control
This is used to control the sound heard from the speakers or
through the headphones. Rotate it in clockwise or in counter
clockwise, the volume will be increased or decreased.
7. Reset
Switch on the POWER, use a paper clip to press the RESET
button for more than 3 seconds duration, then all the current set
up memory will be erased and back to the factory default.
8. Phones jack
This is the jack for headphones. Connect the plug on the stereo
headphones for private listening.
Adjust the volume so that it does not hurt your ears when using
the headphones.
- If you do not intend to use your headphones, always ensure that
you unplug them.
9. Input selector keys
These keys are used to select the program sources. Press the
desired key from the PHONO, DVD, CD, TAPE, and
TUNER/Band keys.
10. Sound field keys
Press these keys to select one of the four sound mode: Flat, Pop,
Classic or Rock.
11. Equalizer key
Press this key to select inside EQ or outside EQ.
12. Surround key
Press this key to select surround on or off.