PYLE Audio PPHP1237UB Speaker User Manual


 
SPECIFICATIONS:
PPHP1591 PPHP1594A PPHP1599AI
Electrical safety
All products are fitted with a detachable power cord (supplied) which connects to the AC mains and the back panel of the
loudspeaker. The power cord has an IEC female connector on one end and male mains connectors on the other end. This
cord is supplied specially to accommodate the different worldwide safety and electrical code requirements. The power
cord supplied with your product has a 3-pin type plug. Do not cut off or damage the grounding plug. Like any electrical
appliance, your EON powered speakers should not be used in water or when wet.
Product design and specifications are subject
to change without previous notice.
PPHP1537UB PPHP1237UB PPHP1037UB
PPHP837UB
Woofer
Impedance 8 ohm 8 ohm 8 ohm 8 ohm
Sensitivity 98dB 97dB 96dB 94dB
Freq.Resp 30Hz -22KHz 30Hz -22KHz 40Hz -20KHz 45Hz -20KHz
Voice coil 75mm,3 inch 65mm,2.5 inch 50mm,2 inch 38mm,1.5 inch
Magnet 60 oz 50 oz 40 oz 30 oz
Tweeter
Impedance 8 ohm 8 ohm 8 ohm 8 ohm
Sensitivity 110dB/m/w 110dB/m/w 110dB/m/w 110dB/m/w
Freq.Resp 600Hz-20KHz 600Hz-20KHz 600Hz-20KHz 600Hz-20KHz
Voice coil 1.75" 1.34" 1" 1"
Diameter Material Titanium Titanium Titanium Titanium