Filter
Top Products
12
precautions
ple730r
ple520p
troubleshooting
• Never drive with the volume raised so high
you cannot hear what is occuring in traffic
around you.
• Be aware that repeated exposure to excessive
volume levels can permanently damage your
hearing!
• Keep all electronics away from moisture, dust,
extreme heat or extreme vibrations.
• Pyle Audio products are capable of sound
pressure levels in excess of 150 dB. Continuous
exposure to sound pressure levels over 100 dB
may cause permanent loss of hearing. Use
common sense and PRACTICE SAFE SOUND.
If you experience...
Signal Processor does not turn on. Check that:
• Remote Turn-On wire has 12V.
• 12V wire has 12V.
• Ground wire is properly connected.
Level of sound is low. Check that:
• Wiring is not loose or cables misconnected/disconnected.
• RCA cables are not faulty.
Background noise is too high. Check that:
• Wiring is not loose or cables misconnected/disconnected.
• RCA cables are not faulty.