Filter
Top Products
7
input gain adjustments
equalizer frequency controls
aux input switch
LED level display
power indicator LED
fader control
volume control
defeat switch
equalizer controls
subwoofer frequency control
subwoofer boost control
power connections
subwoofer/rear/front
channel outputs
line and auxiliary inputs
allows you to adjust the left and right channel input sensitivity to
match the output level from your line or auxiliary source.
these switches determine the frequencies the equalizer control
knobs on the front panel will affect. Setting a switch on one of the
5 bands on top of the equalizer permits the corresponding control
on the front panel to boost or cut the level.
the switch selects the aux or line inputs.
these rows of LEDs display the Preamp Output Levels. Left and right
channels are displayed independently at peak levels.
this LED is illuminated when the unit is properly powered, grounded
and the remote power has been turned on.
• in a 2 Amplifier, 4 Speaker system, rotating the knob to the FRONT
side increases the level of the front speakers; rotating to the REAR
side increase level of the rear speakers. At mid position, both sets
of speakers are at maximum level.
• in a 2 Speaker system, the fader control should be rotated to the
position which provides highest levels for both sets of speakers.
allows adjustment of sound level for particular program material
or source.
when the “DEF” switch is in the position, the equalizer functions
are bypassed. Depressing the “DEF” switch again will restore the
equalizer’s operation.
this seven-band equalizer gives you control over boost or cut at the
frequenciesselected by the corresponding center frequency switches
on top of the unit.
lets you adjust the subwoofer frequency and crossover point from
40-400 Hz.
lets you adjust the subwoofer boost level froma0to+18dB
increase.
connect to power source as follows:
+12V: Connect a red wire of at least 12 gauge to the car battery
or other power source.
GROUND: Connect a black wire of at least 12 gauge to car chassis
for ground connection
REMOTE: Connect an orange wire to remote activating (12V DC)
wire of car stereo or other head unit.
RCA cables are used to connect the subwoofer channel outputs to
the subwoofer channel amplifier inputs, the rear channel outputs
to the rear channel amplifier inputs, and the front channel outputs
to the front channel amplifier inputs.
RCA cables are used to connect your car stereo head unit, CD
player, or other source to either the line or aux inputs.
features
owner’s manual