Filter
Top Products
7 - Pyle Home PCM30A Manual
Specifications
Input Impedance
AUX...................................200mV/50k-Ohm, Unbalanced
MIC 1/MIC 2...........................1.0mV/600-Ohm, Balanced
TEL/PAGE ............................100mV/600-Ohm, Balanced
Max Output Power.........................................60 Watts x 1
THD at rated output power..................1% or less at 1 kHz
Frequency Response +/- 3 dB..................50 Hz to 15 kHz
Signal to Noise Ratio A-Weighted
MIC..........................................................................55dB
AUX..........................................................................70dB
TEL..........................................................................60dB
Speaker Outputs........................4-Ohm, 8-Ohm, 16-Ohm,
25V, and 70V line outputs
Monitor (MOH) Output.............600-Ohm 1V (head phones)
and 8-Ohm 1W (speaker)
Mute Level (AUX/MIC 2)............................................40dB
Tone Controls
Treble....................................................+/- 10dB, 10 kHz
Bass......................................................+/- 10dB, 100 Hz
Power Requirement............120V AC 60Hz/230V AC 50Hz
Power Fuse.........................T 2AL 250V for 110-120V and
T 1AL 250V for 220-240V
Dimensions, inches (mm) WxHxD..........10.7 x 3.46 x 8.86
(272 x 88 x 225)
Weight, lbs (kg) ...............................................9.79 ( 4.44)
Specifications are typical; individual units might vary.
Specifications are subject to change and improvement without notice.