has only one zone selected. Be aware that
while teaching a channel, other PocketWizard
transmitters should refrain from triggering to
prevent the receiver locking to the incorrect
channel. While this is highly unlikely, (1 in 32
chance, and only during the 30 second learning
period) it is still possible. The generator radio
receiver is always in operation while the
generator is powered on. It is possible to use
the photo slave or a sync cord in addition to
radio triggering.
For best radio operation do the following:
• Keeppower,sync,andlampheadcords
away from the antenna.
• Maintainlineofsightbetweenthe
Transmitter and generator whenever
possible.
• Whenhidingthegeneratorfromviewtryto
not hide it behind or against metal or water
filled objects as this affects radio range.
• KeeptheTransmitter’santennaparallel
with the generator antenna.
This equipment has been tested and found to comply with
the limits for a Class B digital device, pursuant to part 15
of the FCC Rules. These limits are designed to provide
reasonable protection against harmful interference in a
residential installation. This equipment generates, uses
and can radiate radio frequency energy and, if not installed
and used in accordance with the instructions, may cause
harmful interference to radio communications.
However, there is no guarantee that interference will not
occur in a particular installation. If this equipment does
cause harmful interference to radio or television reception,
which can be determined by turning the equipment off and
on, the user is encouraged to try to correct the interference
by one or more of the following measures:
- Reorient or relocate the receiving antenna.
- Increase the separation between the equipment and receiver.
- Connect the equipment into an outlet on a circuit different
from that to which the receiver is connected.
- Consult the dealer or an experienced technician for help.
For more information, visit www.profoto.com
NOTICE
334013-59-Printed in Sweden