Filter
Top Products
PRESONUS
23
4.2 APPLICATION GUIDE
The HP4 can be hooked to another processor, such as the
COMP16 or TubePre in a live or studio environment. We do
recommend that whenever possible, balanced cables be used. An
example of a balanced cable would be a TRS (Tip – Ring –
Sleeve). A balanced cable is preferred because it generally has a
greater level of noise rejection. In other words it is less susceptible
to outside interference.
Use with a Console
The HP4 can be connected to the headphone output of a
console/mixer to multiply the headphone outputs. Care should be
taken that the headphone output level of the console/mixer is not
set to high. Setting the output level to the HP4 too loud, could
cause the unit to distort. The monitor outputs are designed to be
connected to the power amp of your studio speakers, to the inputs
of self amplified speakers, or to another HP4.