Precision Power DCX 800.5 Stereo Amplifier User Manual


 
QBASS
TM
Up to +18dB @ 40Hz
QBASS PLUS
TM
Up to +18dB Boost
@30, 36, 44, or 60Hz
Crossovers 12dB/Octave
Crossover Frequency 30-4kHz
Idle Current: DCX 300.4 2 Amps
DCX 600.4 2.5 Amps
DCX 1000.4 3 Amps
DCX 800.5 2.5 Amps
Dimensions
Length Width Height
DCX 300.4 21-½” 10-½” 2-¾”
DCX 600.4 24-¾” 10-½” 2-¾”
DCX 1000.4 29-
3
/8 10-½” 2-¾”
DCX 800.5 28-
1
/8 10-½” 2-¾”
FUSE REQUIREMENTS
You will need to install an in-line fuse or circuit breaker in the power
wire within 18” of the battery. This fuse or circuit breaker is to protect
your vehicle from fire in case the power wire shorts to the vehicle
body. If you are only using one amplifier, use the fuse rating
indicated in this chart. If you are using more than one amplifier, add
up the fuse ratings for all the amplifiers. This sum is the rating for
your fuse or circuit breaker. You may also want to add a power
distribution block near your amplifiers to distribute large gauge
power cable to multiple amplifiers.
Amp Fuse
DCX 300.4 50A
DCX 600.4 70A
DCX 1000.4 100A
DCX 800.5 100A
4