QBass frequency control adjustment.
12. RCA Outputs: RCA outputs provide HP/LP/FULL 30-4kHz
signal to another amplifier.
END PLATE DIAGRAM
1. Cooling Plenums: Maintain a minimum 2” clearance around
cooling plenums for proper amplifier cooling.
2. Power/Ground
PowerLock
TM
: Connect your power and ground
to this Power/Ground
PowerLock
TM
connector.
Note: Item descriptions 3 and 4 only apply to the A800/2
and A100/2 amplifiers.
3.
QBASS REMOTE
TM
: Plug in the data cable from the optional
QBASS REMOTE
TM
dash mounted level control here. (The remote
level control will bypass the amplifier’s on board
QBASS
TM
control.
4.
QBASS
TM
Level Control: Controls bass boost, centered at 40Hz
with up to 18dB of boost. On the A500/2 this adjustment is on the
control panel (see previous figure).
12 34
QBASS
REMOTE
QBASS
+18 0
14