Power Acoustik PTID-6250B Radio User Manual


 
8
Front panel
1
. EJECT Button
Press it to eject a disc. If the disc is not removed for about 10 seconds after eject, the disc is
reinserted automatically.
2. IR Sensor
IR Remote control signal receiving window. Max distance is 6-8 meters, 45 angels.
3.POWER Button
Press it to turn on the unit. Press and hold for 2 seconds to turn the unit off .Press the button
briefly to Mute .Please note that the volume will be muted on all audio output connector.
(* Press any button to turn on the unit except EJECT button on front panel or remote control)
4. VOL Knob Button
Rotate VOL knob to adjust the volume level by turning the knob clockwise to increase or
counterclockwise to decrease.
Press VOL knob to enter SOUND SETTING menu .Rotate VOL Knob to select the sound
settings :EQ => BASS => TREBLE = > BALANCE => FADER => EQ. Adjust the level by click
touch screen to increase or decrease.
DUAL KEY setting: Long press it to choose DUAL OFF, C-DUAL, D-DUAL .For detail, please
see remote control dual describe.
5. MODE Button
Press it to select the mode: Radio, DISC (if there is a disc in unit), USB (if there is a USB
device in the unit), CARD (if there is a SD/MMC card in the unit), Bluetooth and AV IN.
6. AV-in Jack
Put the AV plug into the AV-IN jack which was marked on front panel.
7. SD/MMC CARD slot
SD/MMC card slot, for Multimedia playback files only. Insert a SD/MMC CARD into this slot and
the unit will automatically start reading and playback the card. * Supported Music File Format:
MP3, WMA Files
8. USB slot